Polypropylene Mesh – UNILENE
مراجعات (0)
منتجات ذات صلة
TopFine 32G(0.23)*6mm
| DESCRIPTION | 32G(0.23)*6mm |
| ANTI CORING | Needle body and tip are electro polished to remove small blemishes and rough spots for a smooth penetration |
| SILICONE | Silicone lubricant for smooth gliding and less friction. |
| THIN WALL TECHNOLOGY | Thin Wall Technology Allows effortless flow of medication to be delivered easily and more freely for the same diameter needle |
| HOW TO USE | 1-Remove the sealing foil / 2-Disinfect the insulin pen with alcohol swap / 3-Connect the needle to insulin pen in a straight line. And screw it on the right /4-Measure the amount of insulin pen(UNIT) as follow the doctor’s prescription / 5-Remove the external cap and inner cap. Stand the pen with the needle upside. Push a pen little to see if it is blocked. / 6-Disinfect the injection site with alcohol swap and inject at an angle of 90°. /7-After injecting cover the external cap, and screw to a left side to remove the needle. |
TopFine 32G(0.23)*4mm
| DESCRIPTION | 32G(0.23)*4mm |
| ANTI CORING | Needle body and tip are electro polished to remove small blemishes and rough spots for a smooth penetration |
| SILICONE | Silicone lubricant for smooth gliding and less friction. |
| THIN WALL TECHNOLOGY | Thin Wall Technology Allows effortless flow of medication to be delivered easily and more freely for the same diameter needle |
| HOW TO USE | 1-Remove the sealing foil / 2-Disinfect the insulin pen with alcohol swap/ 3-Connect the needle to insulin pen in a straight line. And screw it on the right / 4-Measure the amount of insulin pen(UNIT) as follow the doctor’s prescription / 5-Remove the external cap and inner cap. Stand the pen with the needle upside. Push a pen little to see if it is blocked. / 6-Disinfect the injection site with alcohol swap and inject at an angle of 90°. /7-After injecting cover the external cap, and screw to a left side to remove the needle. |
المراجعات
لا توجد مراجعات بعد.