CBI

1- Choose the infusion pump of the corresponding specification according to the actual userequirements;2- Take out the infusion pump from the sterilization package, and check whether the connections ofthe infusion pump are firm before use;3- Open the protective cap of the dosing port, push the restrictor on the pipeline to the tightest, and use a sterile syringe to inject the liquid into the silicon capsule from the dosing port4- After the dosing is completed, after confirming that there is no liquid leakage of each part, cover the protective cap of the dosing port and open the restrictor card; see that the liquid is connected to the conical joint after the liquid flows out;5- The self-control infusion pump needs to be placed for 3-5 minutes after adding the medicine, and then use a sterile syringe to insert the instantaneous dosing port of the automatic control device, extract the residual air in the pipeline, and then suck 1~2ml of the liquid medicine and inject it from the instantaneous dosing port, At this time, the liquid medicine can be seen flowing out of the joint, Pipe joints or other connecting devices begin to relieve pain or perform other treatments. Discard all components after use.